Socket fit timber framing chisels and slicks,
Full tang framing chisels,
Custom heavy duty bench chisels
Log builder's slicks and chisels
Custom wood carving slicks
Tool belt scabbards for any of the chisels.
We make them tough, balanced with strong edges
Custom Handmade Framing Cisels
A 5 piece timber framing hand tool set. Recovered high carbon spring steel and mill saw blade steel. Apple wood handles. Socket fit handles
Heavy Duty Timberframing Hand Tool Set
Custom handmade, 18 inch long framing chisels, including a corner chisel, with 5/16 inch thick steel tops welded to the full tangs for hammering. Walnut scales held with stainless steel pins. The hand forged framing slick has a 3 inch edge, a lumber mill chipper blade steel 10 inch blade. 29 inches long overall. The Hand forged draw knives have a 10 inch edge and a 4 inch edge, 5/16 inch thick spines. Walnut scale full tang handles.
Please visit our catalogue Chisels and Slicks page.
Log Home Builder's HD Chisel
1.5 inch edge, 8 inch long blade x 6 inch full tang handle with apple wood scales held with 6 stainless steel threaded pins. A 5/16 inch thick top is welded to the tang for striking a hammer.
Heavy Duty Chisel in Its Tool Belt Scabbard
A HD chisel for log and timber work. Log home builder’s chisel. 14 nches long overall.
Custom Handmade 5 Piece Timber Framing Chisel & Slick Set
Hand forged framing chisels including a corner chisel. The chisels are 20 inches overall. The framing slick’s blade is steel cut from a lumber mill chipper blade. 28 inches overall.
We cut a piece of head saw steel for the 10" long blade at the required width, 1, 1 1/2, 2 1/2 or 3 inches. Forge the edge on. We forge a socket, 1 3/8 - 1 1/2" tapered down to 3/4", minimum of 4" long (you can request a longer socket). We fit the blade into the socket, weld and forge, finish harden and differentially temper. The edge is strong and hard. The blade and socket are tough. Inside the socket there is 3/4" of blade tang. The handle is turned on a lathe and designed to seat into the 1 3/8 - 1 1/4 socket opening down tight fitting over the 3/4" of blade tang . The handle socket wood has a 3/4" V cut which fits over the tang inside the socket.
We cut pieces of drive shaft socket 3/8 - 1/4" wide, heat and drive the rings onto the handles. Tight fitting hoops.
Framing Slick, Offset & Sitting Flat
We offset /dogleg the handles so you don’t skin your knuckles. Socket fit with 4 inches of tang going into the handle.
Cup Slick & a Carver's Slick
Custom made, to order. Copper ferrules, hand forged carbon saw blade steel blades with tangs driven 4 inches into the handles. 30 inches overall.
Hand Forged Framing Slick, Adze and HD Chisel
Handmade hand tools for log and timber work. The slick 30 inches oover all. The 2 inch adze is 16 inches and the 1.5 inch HD chisel is 14 inches. All have apple wood handles.
Heavy Duty Handforged Chisel Set
A set of 3 full tang chisels with a 5/16 steel striking top. Purple heart scales carved into a ferrule and held with stainless steel threaded pins. 1.5, 2 and 2.5 inch edges. 15 inches overall
Custom Handmade Bushcraft Caribou Knife & Chisel For Log Cabin Building
Bushcraft tools. The 1.5 inch chisel is 20 inches overall and has a custom tool belt scabbard with a leg tie. Good chisel for building log cabins. The Mountain Caribou survival knife has a hand forged 7 inch full tang blade, walnut scales and a steel, saw tooth, butt for hammering.
Custom Woodcarving Skew
Slightly curved edge at 10 degrees. 24 inches overall. For larger carving projects.